Getting the Ink Status Information
09-พ.ค.-2008
8200114400
สารละลาย
You can confirm the status of ink tanks in the following two ways:
- With the LCD of this Machine
- With the Ink Lamps
You can confirm the status of each ink tank in the remaining ink volume screen on the LCD.
(1)Make sure that the machine is turned on, then press the HOME button.The HOME screen will be displayed.
(2)Press the left Function button.The below screen will be displayed.
(A) Confirm whether any symbols are displayed here.
 | Ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available. |
 | Ink may have run out. |
NOTE
The ink status information is also displayed in the screen that appears during printing.
An error message may be displayed on the LCD during printing.
 | Ink has run out. See“The following ink has run out. Replace the ink tank.”and take appropriate action. (B) Empty ink tank. |
You can confirm the status of each ink tank by the ink lamps. Open the Scanning Unit (Printer Cover) of the machine to confirm how the ink lamps light or flash.
- Ink lamp is on
The ink tank is correctly set and there is enough ink remaining to print.
- Ink lamp is flashing
Flashing slowly (at around 3-second intervals)
......RepeatsInk is low. You can continue printing for a while, but we recommend you to have a new ink tank available.
Flashing quickly (at around 1-second intervals)
......RepeatsThe ink tank is inserted in the wrong position or it is empty. Ensure that the ink tank is in the correct position as directed by the label on the Print Head Holder. If the position is correct and its lamp flashes, it is empty. Replace it with a new one.
- Ink lamp is off
The tank is not set properly. Press the 
mark on the ink tank until the tank clicks into place. If it does not click into place, make sure that all packaging material is peeled off the ink tank. See “Prepare the replacement tank.” If the lamps are still off after reinserting the ink tanks, there has been an error and the machine cannot print.
mark on the ink tank until the tank clicks into place. If it does not click into place, make sure that all packaging material is peeled off the ink tank. See “Prepare the replacement tank.” If the lamps are still off after reinserting the ink tanks, there has been an error and the machine cannot print.